![Street Coilover Kit w/ Camber Adjust Top Mounts (Inox) for Volkswagen CADDY III MPV (2K/2C)](http://mts-technik.uk/cdn/shop/files/placeholder-inox_a7df9429-6a7f-4331-81e7-014e85cedd82_{width}x.jpg?v=1718324500)
Street Coilover Kit w/ Camber Adjust Top Mounts (Inox) for Volkswagen CADDY III MPV (2K/2C).
The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.
Suitable for the following engine(s) only:
1.2 TSI
1.4
1.6
1.6 TDI
1.9 D
1.9 TDI
2.0 EcoFuel
2.0 SDI
2.0 TDI
2.0 TDI 16V
MTS Product SKU: XMTSGWVW93
Tech Specs
Lowering (Front) | 35 - 90 mm |
---|---|
Lowering (Rear) | 35 - 90 mm |
Series | Street |
Colour | Inox |
Max. Load Front Axle | 1076 - 1235 kg |
Max. Load Rear Axle | -1300 kg |
With Camber Adjustable Top Mounts (Front) | Yes |
Product Description
![]() |
2 year warranty with no mileage limit to confirm high quality. |
![]() |
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. |
![]() |
The use of twin-tube technology guarantees stable shock absorber performance. |
![]() |
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. |
![]() |
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. |
![]() |
The camber plates allow the wheel angle adjustment and increase the precision of driving. |
![]() |
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. |
![]() |
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
Not for 4x4
Only for vehicles equipped with a one-piece leaf spring on the rear axle. If the vehicle is equipped with a two-part leaf spring on the rear axle a one-piece leaf spring has to be purchased seperately (while used in a Caddy - use VW part no. for leaf spring spring 2K0 511 151 N, while used in a Caddy Maxi use VW part no. for leaf spring spring 2K3 511 151 E)
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
Installation of the rear axle adjustment must be carried out in accordance with the instructions
Front and rear axle height adjustable (threaded shock absorber housing on the front, provided adjustment plates + shock absorbers on the rear axle)
For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.