Sport Coilover Kit w/ Camber Adjust Top Mounts (Gold) for Volkswagen VENTO (1H2)

£799

Sport Coilover Kit w/ Camber Adjust Top Mounts (Gold) for Volkswagen VENTO (1H2).

The Sport series suspension is an offer for lovers of significant lowering and stiffer characteristics, a set dedicated to demanding drivers.

Suitable for the following engine(s) only:
1.4
1.6
1.8
1.9 D
1.9 SDI
1.9 TD
1.9 TDI
2.0
2.0 GL
2.8 VR6

MTS Product SKU: MTSGWVW86-S


Tech Specs

Lowering (Front)30 - 80 mm
Lowering (Rear)25 - 80 mm
SeriesSport
ColourGold
Max. Load Front Axle-980 kg
Max. Load Rear Axle-880 kg
With Camber Adjustable Top Mounts (Front)Yes

Product Description

2 year warranty 2 year warranty with no mileage limit to confirm high quality.
High quality suspension components Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin tube technology The use of twin-tube technology guarantees stable shock absorber performance.
Gas pressurised Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Threaded bodies Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Camber adjustable top mounts The camber plates allow the wheel angle adjustment and increase the precision of driving.
Hexacoil spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.

Additional Notes

Front and rear axle height adjustable (threaded shock absorber housing).

Not for 4x4.

If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.




Recently viewed