Street Coilover Kit (Gold) for Audi A4 B9 Avant (8W)

£659

Street Coilover Kit (Gold) for Audi A4 B9 Avant (8W).

The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.

Suitable for the following engine(s) only:
1.4 TFSI
2.0 TDI
2.0 TDI quattro
2.0 TFSI
2.0 TFSI Mild Hybrid
2.0 TFSI g-tron
2.0 TFSI quattro
3.0 TDI
3.0 TDI quattro
30 TDI
30 TDI Mild Hybrid
35 TDI
35 TDI Mild Hybrid
35 TFSI Mild Hybrid
40 TDI
40 TDI Mild Hybrid
40 TFSI Mild Hybrid
40 TFSI Mild Hybrid quattro
40 TFSI g-tron
45 TFSI Mild Hybrid
45 TFSI Mild Hybrid quattro
50 TDI quattro
RS4 quattro
S4 TDI Mild Hybrid quattro
S4 quattro

MTS Product SKU: MTSGWAU59


Tech Specs

Lowering (Front)0 - 45 mm
Lowering (Rear)10 - 55 mm
SeriesStreet
ColourGold
Max. Load Front Axle-1145 kg
Max. Load Rear Axle1216 - 1265 kg

Product Description

2 year warranty 2 year warranty with no mileage limit to confirm high quality.
High quality suspension components Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin tube technology The use of twin-tube technology guarantees stable shock absorber performance.
Gas pressurised Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Threaded bodies Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Hexacoil spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.

Additional Notes

Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)

If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower

During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers

Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.




Recently viewed