Street Coilover Kit (Gold) for BMW 7 (E65)
Tax included. Shipping calculated at checkout
Product Fitment
Street Coilover Kit (Gold) for BMW 7 (E65).
The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.
Suitable for the following engine(s) only:
730 Ld
730 d
730 i, Li
735 i
735 i, Li
740 d
740 i, Li
745 d
745 i, Li
750 i, Li
760 i
760 i, Li
MTS Product SKU: MTSGWBM30
Tech Specs
| Lowering (Front) | 40 - 75 mm |
|---|---|
| Lowering (Rear) | 30 - 80 mm |
| Series | Street |
| Colour | Gold |
| Max. Load Front Axle | -1295 kg |
| Max. Load Rear Axle | -1410 kg |
Product Features
 |
2 year warranty with no mileage limit to confirm high quality. |
 |
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. |
 |
The use of twin-tube technology guarantees stable shock absorber performance. |
 |
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. |
 |
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. |
 |
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. |
 |
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. |
 |
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing)
Only for vehicles without EDC
Only for vehicles without electronic damping
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
Including M-Technik
Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case
Installation is also possible on vehicles equipped with NIVO / factory pneumatic suspension. In this case the assembly is possible only after the disassembly of the factory pneumatic system. In some cases, it may be necessary to use additional OEM Audi parts
Vehicles equipped with NIVO will need additional OE parts. REAR AXLE: 2x top mount (BMW part no: 33526779611), 2x spring shim upper (BMW part no: 33536753765), 2x supporting cup (BMW part no: 33526758283), 2x upper plate (BMW part no: 33526779415).
Choose options
Tax included. Shipping calculated at checkout
Product Features
|
2 year warranty with no mileage limit to confirm high quality. |
|
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. |
|
The use of twin-tube technology guarantees stable shock absorber performance. |
|
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. |
|
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. |
|
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. |
|
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. |
|
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing)
Only for vehicles without EDC
Only for vehicles without electronic damping
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
Including M-Technik
Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case
Installation is also possible on vehicles equipped with NIVO / factory pneumatic suspension. In this case the assembly is possible only after the disassembly of the factory pneumatic system. In some cases, it may be necessary to use additional OEM Audi parts
Vehicles equipped with NIVO will need additional OE parts. REAR AXLE: 2x top mount (BMW part no: 33526779611), 2x spring shim upper (BMW part no: 33536753765), 2x supporting cup (BMW part no: 33526758283), 2x upper plate (BMW part no: 33526779415).
