Comfort Coilover Kit w/ Camber Adjust Top Mounts (Gold) - Weld-In for Volkswagen PASSAT B2 Variant (33B)
Tax included. Shipping calculated at checkout
Product Fitment
Comfort Coilover Kit w/ Camber Adjust Top Mounts (Gold) - Weld-In for Volkswagen PASSAT B2 Variant (33B).
The installation requires the use of OE front struts - they should be cut and welded as described in the included manual
The Comfort series suspension allows you to adjust the lowering of the car and improve driving, while maintaining the greatest possible comfort.
Suitable for the following engine(s) only:
1.3
1.6
1.6 D
1.6 TD
1.8
1.8 Syncro
1.9
2.0
2.0 Syncro
2.2
2.2 Syncro
MTS Product SKU: MTSGWVW112-C
Tech Specs
| Lowering (Front) | 45 - 85 mm |
|---|---|
| Lowering (Rear) | 25 - 95 mm |
| Series | Comfort |
| Colour | Gold |
| Max. Load Front Axle | -880 kg |
| Max. Load Rear Axle | -790 kg |
| With Camber Adjustable Top Mounts (Front) | Yes |
Product Features
 |
2 year warranty with no mileage limit to confirm high quality. |
 |
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. |
 |
The use of twin-tube technology guarantees stable shock absorber performance. |
 |
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. |
 |
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. |
 |
The camber plates allow the wheel angle adjustment and increase the precision of driving. |
 |
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. |
 |
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. |
 |
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing)
Only for vehicles without NIVO / OEM pneumatic suspension
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
Set includes 2x upper "camber plates" on the front axle
The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual
The adjustment range may be different depending on the vehicle version, the lowering or the accuracy of welding of the suspension components.
Choose options
Tax included. Shipping calculated at checkout
Product Features
|
2 year warranty with no mileage limit to confirm high quality. |
|
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. |
|
The use of twin-tube technology guarantees stable shock absorber performance. |
|
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. |
|
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. |
|
The camber plates allow the wheel angle adjustment and increase the precision of driving. |
|
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. |
|
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. |
|
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing)
Only for vehicles without NIVO / OEM pneumatic suspension
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
Set includes 2x upper "camber plates" on the front axle
The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual
The adjustment range may be different depending on the vehicle version, the lowering or the accuracy of welding of the suspension components.
