Street Coilover Kit (Inox) for BMW 5 (E39)
Tax included. Shipping calculated at checkout
Product Fitment
Street Coilover Kit (Inox) for BMW 5 (E39).
The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.
Suitable for the following engine(s) only:
520 d
520 i
523 i
525 d
525 i
525 td
525 tds
528 i
530 d
530 i
535 i
540 i
M5
MTS Product SKU: XMTSGWBM04
Tech Specs
Lowering (Front) | 20 - 70 mm |
---|---|
Lowering (Rear) | 30 - 120 mm |
Series | Street |
Colour | Inox |
Max. Load Front Axle | -1105 kg |
Max. Load Rear Axle | -1225 kg |
Product Features
2 year warranty with no mileage limit to confirm high quality. | |
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. | |
The use of twin-tube technology guarantees stable shock absorber performance. | |
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. | |
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. | |
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. | |
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing)
Not for 4x4
Only for vehicles without NIVO / OEM pneumatic suspension
Only for vehicles without EDC
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: 2x dome bearing (BMW part: 31336752735), 2x washer (BMW part: 31336776760), 2x sealing washer (BMW part: 31331110196). REAR AXLE: 2x supporting bearing (BMW part: 33521091710), 2x supporting pot (BMW part: 33521090282), 2x washer (BMW part: 33521092986).
Choose options
Tax included. Shipping calculated at checkout
Product Features
2 year warranty with no mileage limit to confirm high quality. | |
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. | |
The use of twin-tube technology guarantees stable shock absorber performance. | |
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. | |
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. | |
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. | |
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing)
Not for 4x4
Only for vehicles without NIVO / OEM pneumatic suspension
Only for vehicles without EDC
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: 2x dome bearing (BMW part: 31336752735), 2x washer (BMW part: 31336776760), 2x sealing washer (BMW part: 31331110196). REAR AXLE: 2x supporting bearing (BMW part: 33521091710), 2x supporting pot (BMW part: 33521090282), 2x washer (BMW part: 33521092986).