Street Coilover Kit w/ Camber Adjust Top Mounts (Inox) - Weld-In for BMW 3 (E30)
Tax included. Shipping calculated at checkout
Product Fitment
Street Coilover Kit w/ Camber Adjust Top Mounts (Inox) - Weld-In for BMW 3 (E30).
The installation requires the use of OE front struts - they should be cut and welded as described in the included manual
The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.
Suitable for the following engine(s) only:
315
316
316 i
318 i
318 is
320 i
323 i
324 d
324 td
325 e 2.7
325 i
MTS Product SKU: XMTSGWBM102
Tech Specs
| Lowering (Front) | 25 - 90 mm |
|---|---|
| Lowering (Rear) | 25 - 60 mm |
| Series | Street |
| Colour | Inox |
| Max. Load Front Axle | -865 kg |
| Max. Load Rear Axle | -1030 kg |
| With Camber Adjustable Top Mounts (Front) | Yes |
| With Camber Adjustable Top Mounts (Rear) | Yes |
Product Features
 |
2 year warranty with no mileage limit to confirm high quality. |
 |
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. |
 |
The use of twin-tube technology guarantees stable shock absorber performance. |
 |
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. |
 |
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. |
 |
The camber plates allow the wheel angle adjustment and increase the precision of driving. |
 |
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. |
 |
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
Not for 4x4
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
Independent height adjustment at the lower brackets on the front dampers
Set includes 2x upper "camber plates" on the front axle
The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual
Including M-Technik
Rear thread adjustment block is mounted on the top
For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
Choose options
Tax included. Shipping calculated at checkout
Product Features
|
2 year warranty with no mileage limit to confirm high quality. |
|
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. |
|
The use of twin-tube technology guarantees stable shock absorber performance. |
|
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. |
|
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. |
|
The camber plates allow the wheel angle adjustment and increase the precision of driving. |
|
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. |
|
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
Not for 4x4
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
Independent height adjustment at the lower brackets on the front dampers
Set includes 2x upper "camber plates" on the front axle
The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual
Including M-Technik
Rear thread adjustment block is mounted on the top
For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
