Comfort Coilover Kit (Inox) for Audi A3 (8L)

£819

Comfort Coilover Kit (Inox) for Audi A3 (8L).

The Comfort series suspension allows you to adjust the lowering of the car and improve driving, while maintaining the greatest possible comfort.

Suitable for the following engine(s) only:
1.6
1.8
1.8 T
1.9 TDI

MTS Product SKU: XMTSGWVW10-C


Tech Specs

Lowering (Front)30 - 60 mm
Lowering (Rear)25 - 50 mm
SeriesComfort
ColourInox
Max. Load Front Axle-1020 kg
Max. Load Rear Axle-1025 kg

Product Description

2 year warranty 2 year warranty with no mileage limit to confirm high quality.
High quality suspension components Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin tube technology The use of twin-tube technology guarantees stable shock absorber performance.
Gas pressurised Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Threaded bodies Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Hexacoil spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.

Additional Notes

Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)

Stabilizer bars may need to be changed with longer ones if lowering more than 40mm

If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm

Not for 4x4

If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower

During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers

For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.




Recently viewed