Street Coilover Kit (Inox) for Skoda OCTAVIA Mk1 Combi (1U)

£829

Street Coilover Kit (Inox) for Skoda OCTAVIA Mk1 Combi (1U).

The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.

Suitable for the following engine(s) only:
1.8 T 4x4
1.9 TDI 4x4
2.0 4x4

MTS Product SKU: XMTSGWVW11


Tech Specs

Lowering (Front)25 - 50 mm
Lowering (Rear)25 - 50 mm
SeriesStreet
ColourInox
Max. Load Front Axle-1050 kg
Max. Load Rear Axle-1080 kg

Product Description

2 year warranty 2 year warranty with no mileage limit to confirm high quality.
High quality suspension components Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin tube technology The use of twin-tube technology guarantees stable shock absorber performance.
Gas pressurised Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Threaded bodies Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Hexacoil spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.

Additional Notes

Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).

Stabilizer bars may need to be changed with longer ones if lowering more than 40mm.

If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm.

If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.




Recently viewed