Comfort Coilover Kit w/ Camber Adjust Top Mounts (Inox) for Volkswagen GOLF IV (1J1)
Tax included. Shipping calculated at checkout
Product Fitment
Comfort Coilover Kit w/ Camber Adjust Top Mounts (Inox) for Volkswagen GOLF IV (1J1).
The Comfort series suspension allows you to adjust the lowering of the car and improve driving, while maintaining the greatest possible comfort.
Suitable for the following engine(s) only:
1.4 16V
1.6
1.6 16V
1.6 FSI
1.8
1.8 T
1.8 T GTI
1.9 SDI
1.9 TD
1.9 TDI
2.0
2.3 V5
MTS Product SKU: XMTSGWVW87-C
Tech Specs
| Lowering (Front) | 30 - 60 mm |
|---|---|
| Lowering (Rear) | 25 - 50 mm |
| Series | Comfort |
| Colour | Inox |
| Max. Load Front Axle | -1030 kg |
| Max. Load Rear Axle | -850 kg |
| With Camber Adjustable Top Mounts (Front) | Yes |
Product Features
 |
2 year warranty with no mileage limit to confirm high quality. |
 |
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. |
 |
The use of twin-tube technology guarantees stable shock absorber performance. |
 |
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. |
 |
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. |
 |
The camber plates allow the wheel angle adjustment and increase the precision of driving. |
 |
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. |
 |
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
Stabilizer bars may need to be changed with longer ones if lowering more than 40mm
If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm
Not for 4x4
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
Choose options
Tax included. Shipping calculated at checkout
Product Features
|
2 year warranty with no mileage limit to confirm high quality. |
|
Suspension components characterized by increased corrosion resistance and made of the highest quality materials. |
|
The use of twin-tube technology guarantees stable shock absorber performance. |
|
Pressurised gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. |
|
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. |
|
The camber plates allow the wheel angle adjustment and increase the precision of driving. |
|
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. |
|
Coilover springs made by Eibach, the world leader in the sport springs industry. |
Additional Notes
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)
Stabilizer bars may need to be changed with longer ones if lowering more than 40mm
If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm
Not for 4x4
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers
For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
